Characteristics:

Based on the latest Official Rom M800 V6.
Root with Magisk – Optional (Not Installed).
Installation by Custom Recovery – TWRP 3.0.2-6 LL Version.
Removed Unnecessary Applications.
Integrated OTA updates.
About 1.3Gb of free Ram.
Very fluid system.
Low battery consumption.
Greenify (Background Process Manager – Better with root, but not necessary).
MiXplorer (File Explorer).
Advanced Reboots (Requires root).
Advanced Menu in Settings.
Battery Calibration (Requires root).
AdFree (Advertising Blocker – Requires root).
Smart Wake "Unlock screen with gesture functions".
Multi-Language.

I can not be held responsible for any damages you may cause to your phone due to misuse of the software, the same terminal or any other cause.

Installation Instructions:

I advise you to make a Backup of your Cubot Note S before you do anything, for if something come out wrong or not Rom like you, you can leave it all as it was.

Make sure you have more than 50% of battery.
Download the Rom and copy it to the root of the external SD card. (If problems should reformat the SD).
Turn off the phone.
Start mode recovery with version TWRP 3.0.2-6 LL.
Click Wipes > slide the lower right bar and wait to finish.
We go back > restart > recovery.
Wipe > Wipe advanced, we mark anything (OTG if it exists) and SD card and slide to the right.
Once the advanced Wipes, return back and restart mode recovery. (Question there is no OS installed, reboot also) and again ask if we want to enable write mode and to allow the slip.
This step called "Method of bleach" is not mandatory, but if necessary which you experience stability problems or come other different Rom or inferior Android: started the recovery press Wipes > Format Data > the slip to the right and once again back and restart mode recovery. (Question there is no OS installed, reboot also)
When starts, click install > we are looking for the ZIP FILE on the SD card, press up and slide the slider to the right and proceed to install.
Once finish install reboot only, don't be alarmed. (It takes quite the first home, never remove the battery or you will have to start from scratch).
Ready, now you already you have your Rom Crystal to the last!
Read the recommendations after the installation.

How can see the Rom does not come installed root, is better. In this way the Kernel is intact and should not have problems when running applications: Pokémon Go, Twyp Cash, Snapchat, etc…

From here, if you want to get the root, you should just follow the following steps:

Install root through Magisk:

Download the Pack under downloads Magisk Cubot Note S root.
Extract the contents to your PC and move the extracted folder to our phone.
Start mode recovery > install > look for the folder that you just copied from the Magisk.
1st install the file 1-Magisk-v8_Cubot_Note_S.zip
2nd install the file 2-phh-superuser-magisk-r259.zip
Reboot the phone > Let's Play Store and download this App Phh's SuperUser – Android applications on Google Play
We do not open and using the MiXplorer look for the downloaded folder of the Magisk install: Magisk Manager 2.1. apk and open it.
It will ask you for root permissions and permanently will grant them.
Now we are now thanks to the Magisk root.

If you want you can install Auto Magisk, this App is responsible for enabling and disabling the root automatically for applications that you want. It is optional, but it makes the experience complete Magisk.

Support:http://www.movilesdualsim.com/tema/power-rom-ota-edition-m800-v6-0-1-by-jdesing-09-11-2016.158335/

ROM CUBOT Cheetah 2 Mobile – ROM Android 6.0

ONLY MT6753 and Cheetah 2 not first version Cheetah

Official ROM CUBOT Cheetah 2 Mobile Version: CUBOT_6143C_CHEETAH_2_V02_20161027 – full_n378bh-user 6.0 MRA58K

mt6753_n378bh_6143cgms_chuanqi_cc-cubot_256gbitp24d3_m_lte_3m-fdd-cs_mul

Gapps include -  No Rooted

Language support : Multilang

Install ROM :

Install with SP MDT:

1). Turn off the smartphone. Cable is not connected to the computer.

2). Remove the battery and insert it again (if the battery is removable)

3). Connect your phone to a computer cable. The operating system detects a new device

4). Disconnect the cable from the computer.

5). Run SPMultiPortFlashDownloadProject.exe

6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

7). Click Scatter File and select the MT6753_Android_scatter.txt file (it's in the folder with the rom).

8). Click "Start all".

9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,

 remove and insert the battery (if the battery is removable) and reconnect it to the computer.

10). After (OK) click Stop and disable any phone.

11). Completed.

CARACTERISTICAS Y ESPECIFICACIONES:

Marca:  CUBOT X6

Tamaño de Pantalla:  5.0″

Material de Pantalla:  IPS

Tipo de Pantalla:  720P, OGS Full-Lamination

Material de Cáscara:  Plástico

Estilo:  Teléfono de Pantalla Táctil

Color:  Blanco

Desbloqueado:  Sí (desbloqueado)

3G: WCDMA 850MHz, WCDMA 2100MHz

2G: GSM 1900MHz, GSM 1800MHz, GSM 900MHz, GSM 850MHz

Modo de Espera:  2 SIM 2 en Espera

Tarjeta SIM:  Micro SIM Card, Estándar Tarjeta SIM

Transferencia de Datos:  HSPA, EDGE, GPRS

OS:  Android 4.2.2

CPU:  Octa-core, MTK6592 ARMv7

Frecuencia de CPU:  1.7GHz

RAM:  1GB

ROM:  16GB

GPU: OpenGL ES 2.0, Mali-450 MP

Almacenamiento: TF tarjeta no incluida, 32GB ampliado

Megapixel de Cámara Trasera: Trasera 8.0 MP, Interpolada 13MP

Megapixel de Cámara Frontal: Frontal 5.0 MP

Funciones de Cámara: Disparo continuo, Self timer, Flashlight, Enfoque Automático, Panorama

Resolución de Pantalla: 1280 x 720 píxeles

GPS: AGPS, GPS

Sensor: compass, Sensor de Luz, Sensor de Proximidad, Sensor de Gravedad

WIFI: WiFi hotspot, WiFi 802.11 b/g/n

Bluetooth: Bluetooth 2.0

OTG: Sí

Resolución de vídeo: 1080P, 720P

Formato de Audio: OGG, MID, MP3, WAV

Formato de vídeo: MKV, MOV, 3GP, MP4, AVI

Formato de Imagen: PNG, GIF, BMP, JPG

E-book Formato: Aplicación relevantes deben descargar, PDF, UMD, CHM, TXT, etc

Puertos: Ranura de Tarjeta TF, Audio Jack de 3.5mm, Micro USB

Aplicaciones Instaladas: Navegador, Calculadora, Calendario, Reloj, Correo, Flashlight, Google Navigation, Google Map, Google Play Store, ect.

Otras Características: Mensaje, VPN, Wifi Display, Encendido y Apagado Programados, Grabadora de Voz, FM Radio

Multi-táctil: Multi-táctil de 5-punto

Idioma: Inglés, Ruso, Español, Italiano, Hebreo, Malayo, Catalán, Checo, Danés, Alemán, Francés, Croata, Letón, Lituano, Húngaro, Holandés, Polaco, Noruego, Português, Rumano, Eslovaco, Esloveno, Finlandés, Sueco, Vietnamita, Turco, Griego, Búlgaro, Ucranio, Arabe, Persa, Tailandés, Coreano, Japonés, Chino, Filipino

Batería: 2200mAh, Una Batería

Size: 145 x 74 x 9 mm

Weight: 165g (With a battery)[/toggle] [/raw]

OJO VERSION DE LA ROM ORIGINAL DE FABRICA Y ACTUALIZADA:

DESCARGADA POR CUBOT.NET

X6 4.2_G807_C1_D1_CUBOT_V1.1_20140613

AGRADECER NO CUESTA NADA…

TWRP 3.0.2-1 for CUBOT CHEETAH 2

Download and Install correctly Mediatek Preloader drivers before using Flashtool

( Take care on Windows 8.1/10 drivers, you need to disable driver signature before install:)

https://www.youtube.com/watch?v=50pD0mONm44

http://laurentiumihet.ro/technology/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/

https://thebroodle.com/microsoft/windows/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/

1- With flashtool load MT6753_Android_Scatter.txt 

2- Push download and connect smartphone to pc (smartphone must be powered off)…  in few seconds will start the process and the new TWRP will be flashed (if you experienced an error like Brom etc etc.. don't worry.. go ahead)

P.S after flashing,  remove cable, enter immediately recovery mode at boot using POWER and VOLUME+ keys at the same time until text menu appears, select Recovery with volume+ and confirm with volume- and wait for TWRP loding.

answer Yes to the request of system files modify swiping on the right (if not the script will revert back to stock recovery after boot again)

TO Have root, please before starting flashing with flashtool, put into internal memory and flash in TWRP latest Supersu ZIP from Chainfire 2.78  SR4 or newer:

Consider donate if i help you!

And please rate me 5 stars

Description:
Custom recovery for Cubot Cheetah2 compiled from sources.

- Automatic MTP conection with pc, not necessary to disable MTP and enable it again.
- Default language Spanish.
- Better spanish translation and text adjusted to buttons size.
- Default time format: 24h.
- Default time format: Berlin, Brussels, Paris.
- Default brightness: 66%.
- Defaultactivated screen 120 secs.
- Default navbar inverted, same position as navbar on phone
Via SPFlashtools, tested on linux OS and windows10
Download the zip from download link (just below) and uncompress it, inside you have the recovery.img and the scatter file needed for flashtools installation. Ussual way to proceed with Flashtools.
Very important: Just installed first boot has to be in recovery mode, if not the original will rewrite this custom recovery

Thanks to great master Iceman-IT and megthebest who helped me to fix a mistake I had.

Support: http://www.movilesdualsim.com/tema/mdstwrp_3-0-2-7es-cubot-cheetah-2-by-mdsdev-supersu.161080/

Descripcion:
Custom recovery for Cubot Note S compiled form sources , two versions:
- MDSTWRP_3.0.2-6ES_LL: version for android 5 roms (and android 6 roms but with LL partition format)
- MDSTWRP_3.0.2-6ES_MM: version for android 6 roms (only for roms with MM partition format)

Update 06/11/16
- Automatic MTP conection with pc, not necesary to disable MTP an re-enable again.
- Default language Spanish.
- Better spanish translation and text adjusted to buttons size.
- Default time format: 24h.
- Default time format: Berlin, Brussels, Paris.
- Default brightness: 66%.
- Defaultactivated screen 120 secs.
- Default navbar inverted, same position as lower buttons on phone

Installation:
Via SPFlashtools:
Download the zip file and uncompress it, inside you have the recovery.img and the scatter file needed for flashtools installation. Ussual way to proceed with Flashtools.
Very important, when you get the green tick, disconnect your device and boot on recovery mode, in case you don´t do that and you restart system normally this recovery will be changed by the system for the original one.
Via Flashify:
Install it from Playstore, open app and go to: Recovery image>Choose a file>go where you have this recovery downloaded and sellect it>Normal way>Reboot.
It will rebbot in recovery mode and done.
Via other TWRP:
Boot on recovery mode, pick install and then image, browse where you have the files recovery.img and then just install.

Thanks to great master Iceman-IT, who tought me and helped me a lot.
 

Support: http://www.movilesdualsim.com/tema/recovery-mdstwrp-3-0-2-6es-by-mdsdev-para-android-6-y-android-5.152969/

ROM Mobile Cubot S550 Pro – ROM Android 5.1

ONLY MT6735

Official ROM S550 Pro Version: CUBOT_S550_PRO_V03_20160604 – t823k-cq-5171-33fgu-hd-128g24g-fdd5p-zx-1851 – full_hct6735_35gu_l1-user 5.1 LMY47D

Gapps include – No Rooted

Language support: Multilang

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6735_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).

- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on.

Cheetah TWRP 3.0.2-1

Based on CUBOT_CHEETAH_5281C_V01_20160427 firmware

WARNING :

This twrp works ONLY on the old firmware CheetahPhone

Before to flash this recovery, I strongly recommend you the following steps :

1) Download & install the "adb-setup-1.4.2.exe" from the next links :

http://www.mediafire.com/file/2df821420xpdp48/ADB_1.4.2.rar

2) Connect your phone to your pc with USB cable.
3) Open cmd prompt and type the next command :

adb reboot bootloader (and press enter)

4) Your phone will reboot into FASTBOOT mode. Now, type the next command :

fastboot oem unlock (and press enter)

5) Take a look to the screen of your phone. You will see a WARNING message.
6) Press VOLUME UP to confirm to unlock the bootloader.
7) You will see in the CMD prompt the next messages :

"Start unlock flow" … and when it will be finished … you will see "OKAY".

8 ) Restart your phone in normal mode.
9) Now you can flash the TWRP custom recovery with SP Flash Tool.

ROM Phone CUBOT MAX - ROM Android 6.0

ONLY MT6753

Official ROM CUBOT MAX Version: CUBOT_MAX_V04_20160812 – x6069_cubot_5365u-user 6.0 MRA58K – full_x6069_cq_6101c_cubot_5365u-user

Gapps include – No Rooted

Language support: Multilang

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6753_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).

- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on.

Characteristics:

Based on the latest Official Rom M800 V6.
Root with Magisk – Optional (Not Installed).
Installation by Custom Recovery – TWRP 3.0.2-6 LL Version.
Removed Unnecessary Applications.
Integrated OTA updates.
About 1.3Gb of free Ram.
Very fluid system.
Low battery consumption.
Greenify (Background Process Manager – Better with root, but not necessary).
MiXplorer (File Explorer).
Advanced Reboots (Requires root).
Advanced Menu in Settings.
Battery Calibration (Requires root).
AdFree (Advertising Blocker – Requires root).
Smart Wake "Unlock screen with gesture functions".
Multi-Language.

I can not be held responsible for any damages you may cause to your phone due to misuse of the software, the same terminal or any other cause.

Installation Instructions:

I advise you to make a Backup of your Cubot Note S before you do anything, for if something come out wrong or not Rom like you, you can leave it all as it was.

Make sure you have more than 50% of battery.
Download the Rom and copy it to the root of the external SD card. (If problems should reformat the SD).
Turn off the phone.
Start mode recovery with version TWRP 3.0.2-6 LL.
Click Wipes > slide the lower right bar and wait to finish.
We go back > restart > recovery.
Wipe > Wipe advanced, we mark anything (OTG if it exists) and SD card and slide to the right.
Once the advanced Wipes, return back and restart mode recovery. (Question there is no OS installed, reboot also) and again ask if we want to enable write mode and to allow the slip.
This step called "Method of bleach" is not mandatory, but if necessary which you experience stability problems or come other different Rom or inferior Android: started the recovery press Wipes > Format Data > the slip to the right and once again back and restart mode recovery. (Question there is no OS installed, reboot also)
When starts, click install > we are looking for the ZIP FILE on the SD card, press up and slide the slider to the right and proceed to install.
Once finish install reboot only, don't be alarmed. (It takes quite the first home, never remove the battery or you will have to start from scratch).
Ready, now you already you have your Rom Crystal to the last!
Read the recommendations after the installation.

How can see the Rom does not come installed root, is better. In this way the Kernel is intact and should not have problems when running applications: Pokémon Go, Twyp Cash, Snapchat, etc…

From here, if you want to get the root, you should just follow the following steps:

Install root through Magisk:

Download the Pack under downloads Magisk Cubot Note S root.
Extract the contents to your PC and move the extracted folder to our phone.
Start mode recovery > install > look for the folder that you just copied from the Magisk.
1st install the file 1-Magisk-v8_Cubot_Note_S.zip
2nd install the file 2-phh-superuser-magisk-r259.zip
Reboot the phone > Let's Play Store and download this App Phh's SuperUser – Android applications on Google Play
We do not open and using the MiXplorer look for the downloaded folder of the Magisk install: Magisk Manager 2.1. apk and open it.
It will ask you for root permissions and permanently will grant them.
Now we are now thanks to the Magisk root.

If you want you can install Auto Magisk, this App is responsible for enabling and disabling the root automatically for applications that you want. It is optional, but it makes the experience complete Magisk.

Support:http://www.movilesdualsim.com/tema/power-rom-ota-edition-m800-v6-0-1-by-jdesing-09-11-2016.158335/

1. Turn off your device (remove battery and plugin again, don't switch power on)

2. Launch SP flash tools

3. Load the scatter file from unpacked archive

4. Check all

5. Use option "Firmware Upgrade"

6. Use Option "with battery"

7. Click on Download

8. Plug usb cable to your device

9. When the green check appears, quit SPFT

10. Boot in recovery mode, with power + volume up

11. Wipe Cache then Wipe Data

12. Reboot 

Here my both full YouTube Reviews