Recovery TWRP 3.0.2 by jemmini (4PDA) for Cubot Max.
Download and unzip the archive.
Check that the USB Preloader driver are installed and use a recent version of Flashtrool.
The device should be switched off and disconnected by PC.
Run Flashtool, selct the scatter, check that only BOOT partition is flagged, then select DOWNLOAD.
Only now Connect the device (switched off) to the PC with a short USB cable directly connecetd to USB PC port.
Wait the end of Flashtool process (green tick).
After that you can disconnect the device from PC.
To test the recovery press in the device POWER and VOLUME+ to start in recovery mode.
Please don't enable in recovery mode the system as writable (make a bootloop)
To restart from recovery in normal mode select REBOOT SYSTEM.