Cheetah TWRP 3.0.2-1
Based on CUBOT_CHEETAH_5281C_V01_20160427 firmware
WARNING :
This twrp works ONLY on the old firmware CheetahPhone
Before to flash this recovery, I strongly recommend you the following steps :
1) Download & install the "adb-setup-1.4.2.exe" from the next links :
http://www.mediafire.com/file/2df821420xpdp48/ADB_1.4.2.rar
2) Connect your phone to your pc with USB cable.
3) Open cmd prompt and type the next command :
adb reboot bootloader (and press enter)
4) Your phone will reboot into FASTBOOT mode. Now, type the next command :
fastboot oem unlock (and press enter)
5) Take a look to the screen of your phone. You will see a WARNING message.
6) Press VOLUME UP to confirm to unlock the bootloader.
7) You will see in the CMD prompt the next messages :
"Start unlock flow" … and when it will be finished … you will see "OKAY".
8 ) Restart your phone in normal mode.
9) Now you can flash the TWRP custom recovery with SP Flash Tool.